Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Newark?
Panel replacement in Newark typically costs $250 – $500, with most single-section jobs landing around $300 – $400 depending on the panel style, material, and how the section is sourced. That estimate covers removing the damaged section, ordering a matching panel in the right color and profile, and setting it back into the existing track so the door runs evenly. The written estimate sets the final price, so you’ll know the number before any work starts.
If your door took a hit from a car, a storm, or just years of use, a section swap is often a whole lot cheaper than a new door. Our technicians have up to 9 years of experience and work across the brands most Newark garages actually have: Clopay, Amarr, Wayne Dalton, LiftMaster, Chamberlain, Genie, Craftsman, and Raynor. That matters here, because matching a panel to a specific model means knowing the profile, the color code, and the manufacturer’s current stock. Call (866) 942-6834 for a free estimate.
Panel Replacement Cost Breakdown (2026)
Here’s how the work breaks down for the Newark market. These are typical estimated ranges, and every job gets its own written quote.
| Line item | Typical estimated range |
|---|---|
| Single panel replacement (standard steel, sectional door) | $250 – $500 |
| Panel replacement with a non-standard color or profile match | Upper end of the $250 – $500 range, depending on sourcing |
| Panel replacement plus roller swap (worn rollers revealed after removal) | Panel range + $110 – $220 |
| Panel replacement plus track realignment (bent track from the same impact) | Panel range + $120 – $240 |
| Spring repair, if the door is also struggling to lift | $180 – $340 (one spring; a matched pair costs about twice that) |
| Cable repair, if a cable was damaged in the same incident | $130 – $250 |
| Full new door installation, if the damage runs past one section | $700 – $2200 |
What pushes a panel job toward the top of the range? Usually one of three things: an unusual panel profile that has to be ordered rather than matched from a standard line, a door where the impact bent the track or hinge line at the same time, or a door that’s old enough that the color has faded and the new section needs to be matched against the current production run. What keeps it low? A common steel panel in a stock color on a door that’s otherwise in good shape. When the damage is limited to one section, replacing that section is almost always the right call.
What Affects Panel Replacement Pricing in Newark
- Panel material and profile. A standard steel raised-panel section is the easiest to match and typically sits at the low end of the $250 – $500 range. Carriage-house profiles, long-panel designs, and insulated sections run higher because they’re sourced specifically for your door.
- Brand and model match. Clopay, Amarr, Wayne Dalton, Raynor, and the other major lines each use their own panel profiles and colors. A technician who knows the brand can pull the right part the first time. A mismatch shows up as a visible seam or a section that sits proud of its neighbors.
- Whether the track and hinges were damaged too. In Newark’s older two- and three-family homes, garages often sit tight against the property line, and a car or a delivery truck can hit a door without much room to spare. When the track gets knocked out of line, realignment adds $120 – $240.
- Whether it’s one section or more. A single section is a panel replacement. Two or three sections pushed in usually still pencils out as repair. Beyond that, the math shifts toward a new door, and we’ll tell you plainly when that’s the case.
- Access and ceiling height. A garage with a low ceiling or a tight header makes the job slower. It doesn’t usually change the panel price, but it’s part of what we check on the estimate.
- Color fade and finish matching. Sun and weather fade a door over time, so a new panel in the same factory color can read slightly brighter than its neighbors. We’ll show you what the match will look like before ordering.
How to Save on Panel Replacement
Panel replacement is one of the more budget-friendly garage door repairs, and a few habits keep it that way.
- Fix the panel before the track suffers. A dented section that still runs is a cheap fix. Leave it long enough and the misalignment starts wearing the rollers and hinges, which turns a single-item job into a multi-item one.
- Ask for the brand match up front. When you call, tell us what’s on the door. Knowing whether it’s a Clopay, an Amarr, a Wayne Dalton, or something else lets us check panel availability before anyone drives out, so you’re not paying for a second trip.
- Get a written estimate, not a phone number. A ballpark over the phone can’t account for what’s actually behind the panel. The free on-site estimate covers the real price, and the written estimate is what you pay.
- Don’t skip the opener check. A door that was hit hard can throw the opener’s travel limits off, and the door may run rough even after the panel is fixed. Diagnosing that at the same visit saves a second callout. If the opener itself is failing, opener repair runs $120 – $320.
- Compare repair to replacement honestly. If two or more sections are damaged and the door is nearing the end of its life, a new door at $700 – $2200 may be the better spend. We’ll show you both numbers and let you decide.
Call (866) 942-6834 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Can You Replace Just One Panel, or Does the Whole Door Need to Go?
In most cases, yes, one panel can be replaced on its own. Sectional garage doors are built from separate horizontal panels joined by hinges, so a single damaged section can come out and a matching one can go in without touching the rest of the door. That’s exactly why panel replacement is priced per section rather than per door.
There are limits. If the damage runs across two or three sections and the door is otherwise sound, replacing those sections is still usually worth it. If the door is old, the profile is discontinued, or the frame and track are bent beyond straightening, a full installation at $700 – $2200 may cost less over time than chasing parts. We’ll walk you through both options before you commit to either. For the full range of repair work we handle, see our Newark Garage Door Service page.
Is It Cheaper to Repair a Panel or Replace the Door?
Repair is almost always cheaper when the damage is confined to one section. A panel replacement at $250 – $500 is a fraction of a new door installation at $700 – $2200, and the rest of your door is untouched. Replacement only wins when the structure is compromised or the parts simply aren’t made anymore.
The decision comes down to a few questions. Is the panel still in production? Is the track straight? Do the springs and opener still balance the door? If the answers are yes, repair it. If two or more of those come back no, replacement starts to make sense. Call (866) 942-6834 and we’ll give you a straight answer instead of a sales pitch. Estimates are free.
Can You Come Today for Panel Replacement in Newark?
Often, yes. Panel replacement is a same-day job when the replacement section is in stock and matches your door, and we can confirm availability when you call. If the panel has to be ordered in a specific color or profile, we’ll tell you the timeline up front and get you scheduled.
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If a panel took a hit and the door won’t close, don’t force it. Call (866) 942-6834 and we’ll get someone out to look at it. You can also read more about service across Newark if you’re not sure what’s covered.
Will My Homeowner’s Insurance Cover a Damaged Garage Door Panel?
It depends on the cause. Most homeowner policies treat a garage door panel damaged by a covered event, like a vehicle impact or a falling limb, as a claimable loss. Normal wear, rust, and age aren’t covered. Filing a claim is your call, and we can provide a written estimate you can submit to your insurer.
Before you file, weigh the deductible against the repair. A single-panel job in the $250 – $500 range may sit below your deductible, which makes a claim pointless. We can work with your insurer on documentation, but the decision to file stays with you. Call (866) 942-6834 for an estimate you can send along.
Do You Need a Permit for Panel Replacement in Newark?
Panel replacement on an existing door usually doesn’t require a permit, because the door’s structure and opening stay exactly as they were. A full new door installation may need one. Rules change, so the safest move is to ask your city’s building department directly before work begins.
For a like-for-like panel swap, the question rarely comes up. For anything that changes the door’s size, headroom, or opener wiring, confirm the requirement first. We’ll tell you what the job involves so you know exactly what to ask. Call (866) 942-6834 for a free estimate.
FAQs – Panel Replacement Cost
How much does panel replacement cost in Newark?
Panel replacement in Newark typically costs $250 – $500 for a single section, with most jobs landing around $300 – $400. The final price depends on the panel material, the brand and profile match, and whether the track or rollers need attention at the same time. Call (866) 942-6834 for an exact quote. Estimates are free.
Is it cheaper to repair or replace a garage door panel?
Repair is almost always cheaper when only one section is damaged. A panel replacement runs $250 – $500 versus $700 – $2200 for a new door. Replacement makes more sense when two or more sections are damaged, the profile is discontinued, or the track and frame are bent beyond repair. Call (866) 942-6834 and we’ll compare both for your door.
Can you replace just the bottom panel of a garage door?
Yes. The bottom section is the most commonly replaced panel since it takes the most abuse, and a bottom-panel job typically falls in the $250 – $500 range. The new section comes with its own weather seal, so the door closes clean again. Call (866) 942-6834 for a free estimate.
How long does panel replacement take?
Most single-panel replacements are finished in about one to two hours once the matching panel is on site. If the panel has to be ordered in a specific color or profile, add lead time for sourcing. Call (866) 942-6834 and we’ll confirm availability for your door’s brand.
Will a new panel match the rest of my garage door?
In most cases, yes. When the door is in production with Clopay, Amarr, Wayne Dalton, Raynor, or another major line, we order the correct profile and factory color. On older doors, there may be slight fade difference between the new panel and the weathered ones. Call (866) 942-6834 and we’ll show you what to expect before ordering.
Do you service my brand of garage door?
We work on 8 of the most widely installed residential brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That covers nearly every door and opener a Newark homeowner is likely to have. Call (866) 942-6834 with your model if you’re not sure.
Why the Brand Match Matters for a Panel Job
A panel replacement lives or dies on the match. Each manufacturer uses its own panel profile, rib design, hinge placement, and color codes, and a generic section won’t line up the way the original did. That’s the difference between a repair that looks factory and one that reads as a patch. It’s also why a specialist who works across LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor can diagnose faster and order the correct part the first time.
Our focus is garage doors, not a general handyman list. Repair, opener service, and full installation all sit with the same company, so there’s no handoff when a panel job turns out to need a new track or a fresh opener. One call handles it. The Newark Garage Door Service team can take the job from diagnosis to finish, and Newark homeowners get the same straight answer whether the fix is a single panel or a new door.
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. Same-day service is often available when the right panel is in stock. The free on-site estimate is the number that counts, and the written estimate sets the final price. Call (866) 942-6834 for a free estimate on your panel replacement in Newark.
Written by the team at Newark Garage Door Service.
Pricing reflects the Newark market as of 2026. Newark Garage Door Service offers free estimates – call (866) 942-6834.
What Our Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Oscar Guzman"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty and had it fixed that morning. Door's quieter now than it was before it broke."
- Norma Castillo"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Nathan Miller